Thông số kỹ thuật
Product SKUs
SYS-7048GR-TR • SuperServer 7048GR-TR (Black)
Motherboard
Super X10DRG-Q
Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 22 Cores† / Up to 55MB† Cache
System Bus • QPI up to 9.6 GT/s
Note † BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
GPU Support
• NVIDIA® Tesla® K1/K2/K10/K40/K80/M40/M60/Xeon Phi
System Memory
Memory Capacity • 16x 288-pin DDR4 DIMM slots
• Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type • 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
• 3DS LRDIMM: 128GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps);
RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Controllers • Intel® i350 Dual Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1 Realtek RTL8211E PHY (dedicated IPMI)
Video • ASPEED AST2400 BMC
Input / Output
SATA • 10 SATA3 (6Gbps) ports
LAN • 2 RJ45 Gigabit Ethernet LAN ports
• 1 RJ45 Dedicated IPMI LAN port
USB • 5 USB 3.0 ports (2 rear, 2 via header, 1 Type A)
• 4 USB 2.0 ports (2 rear, 2 via headers)
Audio • HD Audio
Video • 1 VGA port
Serial Port / Header • 2 COM ports (1 rear, 1 Header)
Thunderbolt • Thunderbolt AOC Header
Expansion Slots
PCI-Express • 4 PCI-E 3.0 x16 (double-width)
• 2 PCI-E 3.0 x8 (1 in x16 slot) support Thunderbolt 2.0 AOC
• 1 PCI-E 2.0 x4 (in x8)
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• DMI 2.2
• ACPI 1.0 / 2.0
• USB Keyboard support
• SMBIOS 2.3
• UEFI
Chassis
Form Factor • 4U Rackmountable / Tower
• Optional Rackmount Kit
Model • CSE-747BTQ-R2K04B
Dimensions and Weight
Height • 18.2" (462mm)
Width • 7.0" (178mm)
Depth • 26.5" (673mm)
Package • 27" (H) x 13" (W) x 38" (D)
Weight • Net Weight: 46 lbs (20.9 kg)
• Gross Weight: 62 lbs (28.1 kg)
Available Colors • Dark Gray
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• Hard drive activity LED
• 2 Network activity LEDs
• System Overheat & Power Fail LED
Ports • 2 Front USB 3.0 Ports
Drive Bays
Hot-swap • 8 Hot-swap 3.5" SAS/SATA Drive Trays
Peripheral Bay(s) • 3x 5.25" drive bays in storage module - rotates 90° for Rackmount
• 1x 3.5" fixed drive bay
SAS / SATA Backplane
SAS / SATA Hard Drive Backplane with SES2
System Cooling
Fans • 4x 92x38mm 4-pin PWM Middle Cooling Fans
• 2 Rear exhaust fans
• 2 Optional Rear fans (required for Passive GPUs)
Heatsink • 2 Active Heatsink with Optimal Fan Speed Control
Power Supply (76mm Width)
2000W Redundant Power Supplies with PMBus
Total Output Power • 1000W/1800W/1980W/2000W
Dimension
(W x H x L) • 76 x 40 x 336 mm
Input • 1000W: 100-127 Vac / 12-9.5 A / 50-60 Hz
• 1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz
• 1980W: 220-230 Vac / 10-9.8 A / 50-60 Hz
• 2000W: 230-240 Vac / 10-9.8 A / 50-60 Hz
• 2000W: 200-240 Vac / 11.8-9.8 A / 50-60 Hz (UL/cUL only)
+12V • Max: 83.3A / Min: 0A (100-127 Vac)
• Max: 150A / Min: 0A (200-220 Vac)
• Max: 165A / Min: 0A (220-230 Vac)
• Max: 166.7A / Min: 0A (230-240 Vac)
• Max: 166.7A / Min: 0A (200-240 Vac)
(UL/cUL only)
+5Vsb • Max: 1A / Min: 0A
Output Type • 27 Pairs Gold Finger Connector
Certification UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ]
PC Health Monitoring
CPU • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
• 6-Phase-switching voltage regulator
FAN • Total of eight fan headers supporting up to 8 fans
• 8x fans with tachometer status monitoring
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x fan connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote LED
Other Features • Chassis intrusion detection
• Chassis intrusion header
Operating Environment / Compliance
RoHS•RoHS Compliant
Environmental Spec. • Operating Temperature:
10°C to 35°C (50°F to 95°F)
• Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity:
8% to 90% (non-condensing)
• Non-operating Relative Humidity:
5% to 95% (non-condensing)
