Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
3. 2 PCI-E 3.0 x16 (LP) slot; 1 SIOM card support (flexible networking)
4. IPMI 2.0 + KVM with dedicated LAN
5. 6 Hot-swap 2.5" SATA3 drive bays
6. Video via Aspeed AST2500 BMC
7. 4 Heavy duty 8cm PWM fans with air shroud
8. 2200W Redundant Power Supplies Titanium Level (96%)
Product SKUs
SYS-2029BT-HTR • SuperServer 2029BT-HTR (Black)
Motherboard
Super X11DPT-B
Processor/Cache (per Node)
CPU • Dual Socket P (LGA 3647)
• Intel® Xeon® Scalable Processors,
Dual UPI up to 10.4GT/s
• Support CPU TDP 70-205W*
Cores • Up to 28 Cores with Intel® HT Technology
Note * 200W/205W CPUs are supported under certain configurations. Please contact Supermicro Technical Support for additional information about specialized system optimization
System Memory (per Node)
Memory Capacity
• 24 DIMM slots
• Up to 3TB ECC 3DS LRDIMM, 3TB ECC RDIMM, DDR4 up to 2666MHz
Memory Type
• 2666/2400/2133MHz ECC DDR4 SDRAM
On-Board Devices
Chipset • Intel® C621 chipset
Storage • SATA3 (6Gbps) via Intel C620 controller; RAID 0, 1, 5, 10 per node
Network • Must bundle with at least one SIOMnetwork card
IPMI
• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video
• ASPEED AST2500 BMC
Input / Output (per Node)
LAN • 1 RJ45 Dedicated IPMI LAN port
USB • 2 USB 3.0 ports (rear)
Video • 1 VGA port
DOM • 1 SuperDOM (Disk on Module) port
System BIOS
BIOS Type
• AMI 32Mb SPI Flash ROM
Management
Software • Intel® Node Manager
• IPMI 2.0
• KVM with dedicated LAN
• SSM, SPM, SUM
• SuperDoctor® 5
• Watch Dog
Power Configurations • ACPI / APM Power Management
PC Health Monitoring
CPU
• Monitors for CPU Cores, Chipset Voltages, Memory.
• 4+1 Phase-switching voltage regulator
FAN • Fans with tachometer monitoring
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Monitoring for CPU and chassis environment
• Thermal Control for fan connectors
Chassis
Form Factor • 2U Rackmount
Model • CSE-217BHQ+-R2K22BP2
Dimensions and Weight
Width • 17.6" (447mm)
Height • 3.47" (88mm)
Depth • 28.75" (730mm)
Package • 24.65" (H) x 9.76" (W) x 45.28" (D)
Weight • Gross Weight: 85 lbs (38.6kg)
• Net Weight: 54.5 lbs (24.7 kg)
Available Colors
• Black
Front Panel
Buttons
• Power On/Off button
• UID button
LEDs
• Power status LED
• HDD activity LED
• Network activity LEDs
• Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express • 2 PCI-E 3.0 (x16) Low-profile slots
• 1 SIOM card support
(must bundle with network card)
Drive Bays (per Node)
Hot-swap
• 6 Hot-swap 2.5" SATA3 drive bays
System Cooling
Fans
• 4 Heavy duty 8cm PWM fans with air shroud
Power Supply
2200W Redundant Power Supplies with PMBus
Total Output Power
• 1200W/1800W/1980W/2090/2200W
Dimension (W x H x L)
• 45 x 40 x 480 mm
Input
• 1200W: 100-127Vac / 50-60Hz
• 1800W: 200-220Vac / 50-60Hz
• 1980W: 220-230Vac / 50-60Hz
• 2090W: 230-240Vac / 50-60Hz
• 2090W: 180-220Vac (for UL/cUL only)
• 2200W: 220-240Vac (for UL/cUL only)
• 2090W: 230-240Vdc (for CCC only)
+12V
• Max: 100A / Min: 0A (100-127Vac)
• Max: 150A / Min: 0A (200-220Vac)
• Max: 165A / Min: 0A (220-230Vac)
• Max: 174.17A / Min: 0A (230-240Vac)
• Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only)
• Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only)
• Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
12Vsb • Max: 2.1A / Min: 0A
Output Type • Gold Finger
