Key Features
• Corporate-Wins, DNS, Print, Login
• Gateway, provisioning servers
• Compact Network Appliance
• Cloud Computing
Processor: 1 x Intel® Xeon® Processor SKL-SP 4110 8C/16T 2.1G 11M 9.6GT UPI
Memory: 16GB DDR4.
Network Controller: 2x 10GBase-T LAN ports via Intel® X722
Raid: SATA3 (6Gbps);
RAID 0, 1, 5, 10
Storages: 10 Hot-swap 2.5″ SAS/SATA HDD bays
Power: 750W Redundant Power Supplies
Form Factor: Rackmount 1U
1. Dual socket P (LGA 3647) supports Intel® Xeon® Scalable Processors, Dual UPI up to 10.4GT/s
2. Up to 1.5TB ECC 3DS LRDIMM, up to DDR4-2666MHz; 12 DIMM slots
3. 2 PCI-E 3.0 x16 (FHHL) slots, 1 PCI-E 3.0 x8 (LP) slot, 1 PCI-E 3.0 x16 for Add-on-Module,1 PCI-E M.2
SSD slot
4. 10 Hot-swap 2.5″ SAS/SATA HDD bays (default 8 SATA3, 2
NVMe or SATA3)
5. 2x 10GBase-T LAN ports via Intel® X722
6. 1 VGA, 6 USB 3.0 (4 rear, 2 front)
7. 2 SuperDOM (Disk on Module) ports
8. 750W Redundant Power Supplies Platinum Level High-efficiency
Product SKUs
SYS-1029P-WTRT • SuperServer 1029P-WTRT (Black)
Motherboard
Super X11DDW-NT
Processor/Cache
CPU • Dual Socket P (LGA 3647)
• Intel® Xeon® Scalable Processors,
Dual UPI up to 10.4GT/s
• Support CPU TDP 70-165W*
Cores • Up to 28 Cores with Intel® HT Technology
Note * Certain high Frequency optimized CPU within 165Ws are not supported, for example, Intel Gold 6144 and 6146 are not supported on the system.
System Memory
Memory Capacity • 12 DIMM slots
• Up to 1.5TB ECC 3DS LRDIMM, 768GB ECC RDIMM, DDR4 up to 2666MHz
Memory Type • 2666/2400/2133MHz ECC DDR4 SDRAM
On-Board Devices
Chipset • Intel® C622 chipset
SATA • SATA3 (6Gbps);
RAID 0, 1, 5, 10
Network Controllers • Dual LAN with 10Gbase-T from C622
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video • ASPEED AST2500 BMC
Input / Output
SATA • 8 SATA3 (6 Gbps) ports and 2 NVMe/SATA3 hybrid ports
LAN • 2 RJ45 10GBase-T ports
• 1 RJ45 Dedicated IPMI LAN port
USB • 6 USB 3.0 ports (4 rear, 2 front via header)
Video • 1 VGA port
DOM • 2 SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • AMI 32Mb SPI Flash ROM
Management
Software • Intel® Node Manager
• IPMI 2.0
• KVM with dedicated LAN
• SSM, SPM, SUM
• SuperDoctor® 5
• Watch Dog
Power Configurations • ACPI / APM Power Management
PC Health Monitoring
CPU • Monitors for CPU Cores, Chipset Voltages, Memory.
• 4+1 Phase-switching voltage regulator
FAN • Fans with tachometer monitoring
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Monitoring for CPU and chassis environment
• Thermal Control for fan connectors
Chassis
Form Factor • 1U Rackmount
Model • CSE-116AC2-R706WB2
Dimensions and Weight
Width • 17.2" (437mm)
Height • 1.7" (43mm)
Depth • 23.5" (597mm)
Gross Weight • 46 lbs (20.9kg)
Available Colors • Black
Front Panel
Buttons • Power On/Off button
• UID button
LEDs • Power status LED
• HDD activity LED
• Network activity LEDs
• Universal Information (UID) LED
Expansion Slots
PCI-Express • 2 PCI-E 3.0 x16 (FHHL) slots
• 1 PCI-E 3.0 x8 (LP) slot
• 1 PCI-E 3.0 x16 for Add-on-Module (AOM)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 8 SATA3 (6Gbps) ports and 2 NVMe/SATA3 hybrid ports (connected to onboard storage controller)
Backplane
SAS/SATA HDD Backplane
System Cooling
Fans • 4 Counter-rotating 4cm PWM fans, 2 fans for AOC cooling
AC/DC240V Input Redundant Power Supply
700W/750W Redundant Power Supplies with PMBus
Total Output Power • 700W/750W
Dimension
(W x H x L) • 54.5 x 40.25 x 320 mm
Input • 100 - 140Vac / 8 - 6A / 50-60Hz
• 200 - 240Vac / 4.5 - 3.8A / 50-60Hz
• 200 - 240Vdc / 4.5 - 3.8A (CCC Only)
+12V • Max: 58A / Min: 0.5A (100 - 140Vac)
• Max: 62A / Min: 0.5A (200 - 240Vac)
• Max: 62A / Min: 0.5A (200 - 240Vdc)
(CB/CCC Only)
+5V sb • Max: 3A / Min: 0A
Output Type • Gold Finger Connector Mating with Molex 45984-4343
Certification
UL/cUL/CB/BSMI/CE/CCC
Platinum Certified
[ Test Report ]
Operating Environment
RoHS•RoHS Compliant
Environmental Spec. • Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
• Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity:
8% to 90% (non-condensing)
• Non-operating Relative Humidity:
5% to 95% (non-condensing)