Key Features
4 Hot-plug System Nodes in 4U
Front I/O. Each node supports:
1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s
2. Up to 2TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 16 DIMM slots
3. 3 PCI-E 3.0 x16 slots (support 3 Double-width GPU/Xeon Phi cards), 2 PCI-E 3.0 x8 slots
4. Front I/O ports: 2 GbE LAN, 2 USB 3.0 and 1 VGA connector
5. Built-in Server management tool (IPMI 2.0, KVM/media over LAN) w/ dedicated LAN port
6. 2 Hot-swap 3.5″ SATA3 HDDs
7. 2000W High efficiency (96%) Redundant PSU; Titanium Level
Product SKUs
SYS-F628G3-FT+ • SuperServer F628G3-FT+ (Black)
Motherboard
Super X10DRFF-IG
Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 22 Cores† / Up to 55MB† Cache
System Bus • QPI up to 9.6 GT/s
Note † BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
GPU/Xeon Phi Support
• 3 Double-width NVIDIA GPU/Xeon Phi per node
(total of 12 GPU/Xeon Phi cards in 4U)
• Supports Intel Xeon Phi
• Supports NVIDIA K1/K2/K10/K20M/K20X/K40M/K80 (only supports 2 per node), Xeon Phi 5110P, and Xeon Phi 3120P/7120P
System Memory
Memory Capacity • 16x 288-pin DDR4 DIMM slots
• Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type • 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
• 3DS LRDIMM: 128GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Controllers • Intel® i350 Dual Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output (per node)
SATA • 2x SATA3 (6Gbps) ports
LAN • 2x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 2x USB 3.0 ports
VGA • 1x VGA port
Chassis
Form Factor • 4U Rackmount
Model • CSE-F424AG-R2K04BP
Dimensions
Width • 17.63" (448mm)
Height • 6.96" (177mm)
Depth • 35" (889mm)
Package • 25.6" (W) x 11.8" (H) x 48.0" (D)
Weight • Net Weight: 105 lbs (47.63 kg)
• Gross Weight: 150 lbs (68.04 kg)
Available Colors • Black
Front Panel
Buttons • Power On/Off button
• UID button
LEDs • Power status LED
• UID LED
Expansion Slots (per node)
PCI-Express • 3x PCI-E 3.0 x16 (FHFL) slots
(support 3x Double-width GPU/Xeon Phi)
• 2x PCI-E 3.0 x8 (LP) slots
Drive Bays (per node)
Hot-swap • 2x 3.5" Hot-swap SATA3 drive bays
System Cooling
Fans • 8x 8cm heavy duty 11K fans with air shroud and PWM fan speed control
Power Supply (76mm Width)
2000W Redundant Power Supplies with PMBus
Total Output Power • 1000W/1800W/1980W/2000W
Dimension
(W x H x L) • 76 x 40 x 336 mm
Input • 1000W: 100-127 Vac / 12-9.5 A / 50-60 Hz
• 1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz
• 1980W: 220-230 Vac / 10-9.8 A / 50-60 Hz
• 2000W: 230-240 Vac / 10-9.8 A / 50-60 Hz
• 2000W: 200-240 Vac / 11.8-9.8 A / 50-60 Hz (UL/cUL only)
+12V • Max: 83.3A / Min: 0A (100-127 Vac)
• Max: 150A / Min: 0A (200-220 Vac)
• Max: 165A / Min: 0A (220-230 Vac)
• Max: 166.7A / Min: 0A (230-240 Vac)
• Max: 166.7A / Min: 0A (200-240 Vac)
(UL/cUL only)
+5Vsb • Max: 1A / Min: 0A
Output Type • 27 Pairs Gold Finger Connector
Certification UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ]
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.2
• ACPI 1.0 / 2.0
• USB Keyboard support
• SMBIOS 2.3
• UEFI
Operating Environment / Compliance
RoHS•RoHS Compliant
Environmental Spec. • Operating Temperature:
10°C to 35°C (50°F to 95°F)
• Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity:
8% to 90% (non-condensing)
• Non-operating Relative Humidity:
5% to 95% (non-condensing)