Key Features
1. Single socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 and E5-1600 v4†/ v3 family
2. Up to 1TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 8x DIMM slots
3. 2x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards), 1x PCI-E 3.0 x8 low-profile slot
4. Integrated IPMI 2.0 with KVM and Dedicated LAN
5. Intel® i350 Dual-Port GbE Controller
6. 3x 3.5″ Hot-swap drive bays
7. 1400W High-efficiency Power Supply Platinum Level (94%+) Digital Switching Control & PMBus 1.2
8. 8x Counter rotating fans w/ optimal fan speed control
Product SKUs
SYS-5018GR-T • SuperServer 5018GR-T (Black)
Motherboard
Super X10SRG-F
Processor
CPU • Intel® Xeon® processor E5-2600 v4†/ v3, E5-1600 v4†/ v3 family (up to 145W TDP **)
• Single Socket R3 (LGA 2011)
Core / Cache • Up to 22 Cores† / Up to 55MB† Cache
Note † BIOS version 2.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support
System Memory
Memory Capacity • 8x 288-pin DDR4 DIMM slots
• Up to 1TB ECC 3DS LRDIMM
• Up to 512GB ECC LRDIMM
• Up to 512GB ECC RDIMM
Memory Type • 2400†/ 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs
DIMM Sizes • 3DS LRDIMM: 128GB
• LRDIMM: 64GB, 32GB
• RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) via C612 controller
• RAID 0, 1, 5, 10 support
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Controllers • Intel® i350 Dual Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 6x SATA3 (6Gbps) ports
LAN • 2x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 2x USB 3.0 ports (rear)
Video • 1x VGA Connector
Serial Port • 1x Serial header
DOM • 2x DOM (Disk on Module) power connectors
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• DMI 2.3
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• Hardware BIOS Virus protection
• SMBIOS 2.7.1
• UEFI 2.3.1
• RTC (Real Time Clock) Wakeup
Chassis
Form Factor • 1U Rackmount
Model • CSE-818GTS-1K43BP2
Dimensions
Height • 1.7" (43mm)
Width • 17.2" (437mm)
Depth • 28.2" (716mm)
Weight • Net Weight: 27 lbs (12.25 kg)
• Gross Weight: 35.5 lbs (16.10 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
UID LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots
(support GPU/Xeon Phi cards)
• 1x PCI-E 3.0 x8 slot for I.B. card
• UIO AOC Compatibility Matrix
Drive Bays
Hot-swap • 3x 3.5" Hot-swap drive bays
System Cooling
Fans • 8x counter-rotating fans with optimal fan speed control
Power Supply
1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2
AC Voltage • 1200W: 100-140 V, 14.7-10.5A, 50-60 Hz
• 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz
+5V standby • 6 Amp
+12V • 100 Amp/115 Vac
• 117 Amp/230 Vac
With Power Distributor • +5V: 14 Amp
Certification
Platinum Certified
PC Health Monitoring
CPU • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
• CPU Core 5-Phase-switching voltage regulator
FAN • Total of eight 4-pin PWM fans
• 8x fans with tachometer monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control
Temperature • Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• PSU I2C temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI
LED • Power Fail / Overheat LED
• Suspend-state Indicator LED
• UID LED
Other Features • SDDC Support
Operating Environment / Compliance
RoHS•RoHS Compliant
Environmental Spec. • Operating Temperature:
10°C to 35°C (50°F to 95°F)
• Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity:
8% to 90% (non-condensing)
• Non-operating Relative Humidity:
5% to 95% (non-condensing)