Key Features
– Compute Intensive Application
– HPC, Data Center, Enterprise
Server
– Hyperscale / Hyperconverged
Processor: 1 x Naples 16C/32T 7281 2.1G 32M
Memory: 16GB DDR4.
Network Controller: 1 SIOM card support (flexible networking)
Note: must bundle with Network card
Raid: SAS3 (12Gbps) via Broadcom 3008; IT mode
Storages: 1 M.2, 6 Hot-swap 2.5″ SATA3 drive bays
Power: 2200W Redundant Power Supplies
Form Factor: Rackmount 2U
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Dual AMD EPYC™ 7000-Series Processors
2. Up to 2TB ECC 3DS LRDIMM, up to DDR4-2666MHz; 16 DIMM slots
3. 2 PCI-E 3.0 x16 (LP) slot; 1 SIOM card support (flexible networking)
Note: must bundle with Network card
4. IPMI 2.0 +
KVM with dedicated LAN
5. 1 M.2, 6 Hot-swap 2.5″ SATA3 drive bays
6. Video via Aspeed AST2500 BMC
7. 2200W Redundant Power Supplies Titanium Level (96%)
(Full redundancy based on configuratio and application load)
– Compute Intensive Application
– HPC, Data Center, Enterprise
Server
– Hyperscale / Hyperconverged
Processor: 1 x Naples 16C/32T 7281 2.1G 32M
Memory: 16GB DDR4.
Network Controller: 1 SIOM card support (flexible networking)
Note: must bundle with Network card
Raid: SAS3 (12Gbps) via Broadcom 3008; IT mode
Storages: 1 M.2, 6 Hot-swap 2.5″ SATA3 drive bays
Power: 2200W Redundant Power Supplies
Form Factor: Rackmount 2U
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Dual AMD EPYC™ 7000-Series Processors
2. Up to 2TB ECC 3DS LRDIMM, up to DDR4-2666MHz; 16 DIMM slots
3. 2 PCI-E 3.0 x16 (LP) slot; 1 SIOM card support (flexible networking)
Note: must bundle with Network card
4. IPMI 2.0 +
KVM with dedicated LAN
5. 1 M.2, 6 Hot-swap 2.5″ SATA3 drive bays
6. Video via Aspeed AST2500 BMC
7. 2200W Redundant Power Supplies Titanium Level (96%)
(Full redundancy based on configuratio and application load)
Product SKUs
AS -2123BT-HTR • A+
Server 2123BT-HTR (Black)
Motherboard (per Node)
Super H11DST-B
Processor/Chipset (per Node)
CPU
• Dual AMD EPYC™ 7000-series Processors
• Socket SP3
Cores
• Up to 32 Cores
System Memory (per Node)
Memory Capacity
• 16 DIMM slots
• Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs
• 8-channel memory bus
• For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
• See Detailed Memory Support Matrix
Memory Type • DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
Memory Sizes • 8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage • 1.2V
Error Detection • Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
On-Board Devices (per Node)
Chipset • System on Chip
Storage • SATA3 (6Gbps) vs AMD EPYC
Network • 1 PCI-E 3.0 x16 SIOM LAN Networking Slot, Flexibility optional of SIOM LAN supported (Must bundle with at least one SIOM network card)
IPMI
• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video • ASPEED AST2500 BMC
Input / Output (per Node)
LAN
• Provided via SIOM (optional)
• 1 RJ45 Dedicated IPMI LAN port
USB • 2 USB 3.0 ports (rear)
Video • 1 VGA port
DOM • 1 SuperDOM (Disk on Module) port
Others • 1 COM port (header)
• 1 TPM 2.0 header
System BIOS (per Node)
BIOS Type • AMI 128Mb SPI Flash ROM
Management (per Node)
Software • IPMI 2.0
• KVM with dedicated LAN
• SSM, SUM
• SuperDoctor® 5
• Watch Dog
Power Configurations • ACPI / APM Power Management
Chassis
Form Factor • 2U Rackmount
Model • CSE-217BHQ+-R2K22BP2
Dimensions and Weight
Width • 17.25" (438mm)
Height • 3.47" (88mm)
Depth • 28.5" (724mm)
Package • 26.4" (H) x 11.2" (W) x 39.8" (D)
Weight • Gross Weight: 85 lbs (38.6 kg)
• Net Weight: 54.5 lbs (24.7 kg)
Available Colors
• Black
Front Panel (per Node)
Buttons
• Power On/Off button
• UID button
LEDs
• Power status LED
• HDD activity LED
• Network activity LEDs
• Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express • 2 PCI-E 3.0 (x16) Low-profile slots
• 1 SIOM card support
(must bundle with network card)
M.2 • Interface: PCI-E 3.0 x4
• Form Factor: 22110
• Support SATA devices
Drive Bays (per Node)
Hot-swap • 6 Hot-swap 2.5" SATA3 drive bays
System Cooling
Fans • 4 Heavy duty 8cm PWM fans with air shroud
Power Supply
2200W Redundant Power Supplies with PMBus
Total Output Power • 1200W/1800W/1980W/2090/2200W
Dimension (W x H x L)
• 45 x 40 x 480 mm
Input
• 1200W: 100-127Vac / 50-60Hz
• 1800W: 200-220Vac / 50-60Hz
• 1980W: 220-230Vac / 50-60Hz
• 2090W: 230-240Vac / 50-60Hz
• 2090W: 180-220Vac (for UL/cUL only)
• 2200W: 220-240Vac (for UL/cUL only)
• 2090W: 230-240Vdc (for CCC only)
+12V
• Max: 100A / Min: 0A (100-127Vac)
• Max: 150A / Min: 0A (200-220Vac)
• Max: 165A / Min: 0A (220-230Vac)
• Max: 174.17A / Min: 0A (230-240Vac)
• Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only)
• Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only)
• Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
12Vsb
• Max: 2.1A / Min: 0A
Output Type
• Gold Finger